How to Move the Mouse Cursor with the Keyboard Shortcut in Windows

Most people think that a computer has to be operated with the mouse and that, if you cannot use a mouse, you cannot use your computer. This is not the case. In fact not only your computer be operated entirely from the keyboard, but doing so can often be faster and easier than using the mouse.

How to Move Your Mouse Cursor without a Mouse :

Thankfully, there is a feature built into Windows called Mouse Keys that allow you to use the numeric keypad on your keyboard to move your mouse around the screen. It even allow you to simulate a right-click, double-click and left-click. On desktops, you will use the keypad at the far right of the keyboard. On laptops, you will probably have to enable Num Lock or press and hold the function key before pressing the numbers.

To enable Mouse Keys in Windows, open the Control Panel and click on Ease of Access.

ease of access

Towards the bottom under Explore all settings, you will see a link called Make the mouse easier to use.

easier to use mouse

Now click on the Turn on Mouse Keys box. This will enable Mouse Keys in Windows. You can also enable Mouse Keys without having to go through the Control Panel by pressing ALT + Left SHIFT + NUM LOCK at the same time. Note that you have to use the left SHIFT key as the right one will not work.

turn on mouse keys

Click on Set up Mouse Keys to configure all the options and settings. You can adjust the pointer speed if you find it too slow or fast and you can also check a box to use CTRL and SHIFT to make the cursor move faster or slower, respectively.

setup mouse keys

The other main setting to note is under Other Settings. By default, Mouse Keys will work only when NUM LOCK is On. You can change this to Off if you like. If Mouse Keys is being used, you should see a small little mouse icon in the system tray, otherwise it will have a red X over the mouse.

mousekeys off
mouse keys on

Here are the controls, provided that you have a numeric keypad, to run Mouse Keys. You should now be able to move the cursor around with just the keyboard. In order to click on something, you first press /, , or * to select the appropriate button on the mouse. Then press 5 to either click or right-click depending on which button you chose.

To double-click on something, you have to select the left mouse button (/) and then press the + (plus) sign. You can also drag and drop items by first moving the mouse cursor over the item and then pressing 0 to start the drag and . (period) to drop it.

  • 2 = Move Down
  • 8 = Move Up
  • 4 = Move Left
  • 6 = Move Right
  • 7 = Move Diagonally Top Left
  • 9 = Move Diagonally Top Right
  • 1 = Move Diagonally Bottom Left
  • 3 = Move Diagonally Bottom Right
  • 5 = Once Button Selected, will
  • / = Select Left Mouse Button
  • – = Select Right Mouse Button
  • * = Select Both Buttons

Note: If this does not work it could be because your computer settings cannot be changed due to local IT policies – contact your local IT support for further help.

Leave a Reply